Shop Categories

Section E Raised Ridge Roll
Expansion trim for large roofs. Also used to simulate raised lead rolls. 3mtr lengths.
In stock
Click image to enlarge  
Section E Expansion Joint : 280mm girth £10.20

Prices do not include VAT

 E280 is used to create both expansion joints on large roofs (over 50m*) and create rolls on any ridge details. It is compatible with C5 closures. An adequate gap in the deck should be cut if necessary, the trim should then be nailed to each end of the decking at 300mm centres. The join over the nails should then be bandaged and the laminate can be applied over the trim. To bond these trims together, or to cap with C% closures, apply a thin strip of PU adhesive e to the inside edge of the overlapping trim and rub into place.
Poly Fibre Logo
Advert Image